This is the third video in our lab and testing series. The Lancaster Products Lab is equipped with a production-sized K4 mixer to test and optimize mix recipes at full scale. In this video, we are testing a clay type of material for pelletization.

The K4 mixer introduces a third tool, the low-speed plow, which, along with the rotating pan, transports material to the high-speed rotor. You can see how the high shear counter-current movement creates a rolling action which agglomerates the materials into pellets. The K4 mixer has a bottom discharge; the plow allows for the rapid and complete evacuation of the mixing cavity. After the mixer is fully evacuated, the bottom discharge closes, and reseals ready for the next batch.

You can see that the raw unscreened pellets are very uniform and quite strong, which allows them to maintain their integrity for easy handling.

Contact us today and improve your mixing and pelletizing process in our research and development testing lab

[email protected]

717-273-2111

Lancaster Products
920 Mechanic Street
Lebanon, PA 17046

Local: 717.273.2111
Toll Free: 800.447.7351

Email: [javascript protected email address]

Office Hours:
Mon - Fri: 8:00 am - 5:00 pm

Prototype Mix Recipe Optimization in Lancaster K3 Mixers

This is the second video in our lab and testing series. The Lancaster Products lab is equipped with a small production-sized K3 mixer to test and optimize mix recipes at a prototyping scale. In this video, we are testing a clay type of material for pelletization.

Looking inside of the mixing cavity, you see the counter-current mixing action. The pan rotates clockwise, and the high shear mixing tool spins counterclockwise. The mixing pan actively transports material to the primary mixing tool. Slowing the action down gives us a good view of how the Lancaster mixing action creates a tumbling that promotes agglomeration by rolling the particles much the same way as a snowball growing larger by rolling down a hill.

read more

Proof of Concept Testing in Lancaster K1 Lab Mixers

Lancaster Products is dedicated to optimizing our customers’ mixing processes and recipes. This 3 part video series will focus on our on-site lab and testing capabilities. In this first video, we demonstrate proof of concept testing with a chicken litter material for a fertilizer product.

We use our K1 lab mixer during these initial tests. We load the K1 mixer with the test material and then program the steps and feeds. After the mixer begins, we add a liquid binder to it to allow the material to agglomerate into granules or larger pellets.

read more

Sitemap | Privacy Policy
Copyright © 2021 Lancaster Products | All Rights Reserved